Reasons of the loss of the internet
If you find yourself wondering why connected to wifi but no internet. You understand what’s wrong. So even without the Internet you can view this article.
Know the reason of why Wi-Fi not working
Just as you cannot cure an infection without knowing what is causing it, you cannot repair Wi-Fi if you don’t know why it doesn’t work. Fortunately, in such situations when connected to wifi but no internet, the fault can only be attributed to one of three things: your device, your network, or the Internet.
We always recommend that you do not connect to unprotected public networks, but this time look for the nearest working Wi-Fi network, whether it is a friend’s house or a cafe, and try to connect to it.
What happens if your gadget connected no internet? If no site works, go to the How to solve your Wi-Fi and Internet problems section. But be aware that you may have to call your ISP.
Note: If your Internet is operating too slowly, there are also ways to improve its speed.
Several other aspects to check
- Check the lights on your router: If a light seems different to you, something is wrong. If you do not know your router well enough to know what could be different, consult its manual: it will tell you what each light means, and how to solve the problems you encounter.
- Move closer to the router: In large homes or in places with a lot of interference, your wireless connection may not be strong enough to reach your device. If, as you get closer, the situation improves, there is hope! There are many ways to improve your Wi-Fi signal strength.
- Connect an Ethernet cable: This solution will not be suitable for most mobiles, but if the device you are having a problem has an Ethernet port, plug an Ethernet cable into your router (most routers have at least one Ethernet port) and connect the other end to your device. “The problem is it is constant or does it occur from time to time?
- If your wireless network shuts down and re-establishes itself at random, it is perhaps the software of your router or your device which is the cause. If the problem occurs on all your devices, you may find that you have improved by updating your router’s firmware (and it’s also good for your security).
- It can be difficult to tell if your software or hardware is up to date, especially if you are unable to access the Internet.
- This also applies to router issues: although it is possible to manually update your router’s firmware (we’ll show you how later in this article), you may still need to call your ISP or an expert if you cannot log in to retrieve these firmware updates or if the problem is with your hardware.
How to solve your Wi-Fi and Internet problems
All right, it’s time to roll up your sleeves and tackle the problem with your router’s operation. The first thing to do will therefore be to figure out how to get there. You are ready?
What to do if I forget my router’s username and password?
First, check all the papers that came with your router when you received it: you will probably find a manual containing them. But if you can’t get your hands on it, or you’ve already thrown away all of these papers, don’t worry. If you or someone else has changed your router’s username and password and you don’t remember, there is still hope. Find and reset the reset button on your router for 10 to 20 seconds. This will restore its factory settings, including its default username and password. This reset may even solve your problem.
Determine your router’s IP address
Did you try to turn off and on again?
Technology is something strange. Sometimes the equipment just needs a little help to get started again. Turn off your modem, wait for a few seconds, and then start it again.
Give him time to start again and check if the situation has improved. If so, great! We are pleased to have been capable to help you.
But if the problem persists and you have to constantly switch it off and on again for it to work, then your problem is much more serious. You will probably need a new modem and / or router.
Change the wireless channel
Wireless networks are a special arrangement but not a magic. They depend on “channels” to travel in the air, and some channels are better than others, especially in the most populated areas of the world where many devices emit interference.
By changing the channel on which your wireless operates, you could not only repair your Wi-Fi connection but also make it faster if you’re lucky.
From there, just try a new channel, no matter which one, and apply the change. Stay a few minutes to see if a change takes place, then try again with one more channel in case of wifi connected no internet.
If you discover a channel that works, great! Enjoy the web! But if no changes work, remember to re-select your original channel before trying another solution.
If you don’t think about doing it, you may be able to fix the Wi-Fi without realizing it because the channel you left is not working.
Update your firmware
A lot of devices automatically revise their firmware when they become aware that a new update has been released. But usually routers have to be updated manually … which could fix your connection problem.
Start by linking to your router using the method thorough above. Next, look for a tab or section generous Firmware, Router Update, Update, or with an alike title. The title may vary depending on the router you are using. So if in doubt, take a look, it costs nothing.
When you find the tab, the current firmware version should be listed there, and there should be a button indicating something like Check, Analyze, or Update.
Click on it to see if there is newer firmware that you could install. Sometimes the update download will start without you having to do anything, and other times you will have to click on links and deal with them manually.
But in case you do not find the firmware page, or the least useful button, do not panic: check the model of your router, and then go to the manufacturer’s website. Consider changing it.
Check the cables
Make sure all cables are securely connected to your router. If not, reconnect them and check if you see any improvement.
Check your DHCP settings
DHCP (or Dynamic Host Configuration Protocol) is a system that distributes IP addresses quickly and automatically over the network. IP addresses are important because they are the key element for devices to connect and communicate over the Internet.